Secure your smartphone holder or action camera with this luxurious, convenient, and durable handlebar brace made from machined aluminum. [Special Parts Takegawa]

Adjustable handlebar brace for general-purpose handlebar pipes (Φ22mm to Φ22.2mm) / Clamp width when straightened: 203mm to 285mm

SP Takegawa has confirmed compatibility with the following vehicles: GROM (JC61/JC75/JC92), Monkey 125 (JB02/JB03/JB05), Dax 125 (JB04/JB06), CT125 (JA55/JA65), Ape/Ape100, XR50/100 Motard, PCX (JF81/JK05-1000001-1199999), PCX150 (KF30), PCX160 (KF47-1000001-1199999), XSR125 (BVF1), Z125 PRO (BR125H), Eliminator (8BL-EL400A).

This highly convenient adjustable handlebar brace can be attached to the pipe handlebars of applicable models to increase the strength and customizability of the handlebar area.It can also be used as a multi-clamp bar to secure smartphone holders, navigation systems, action cameras, and more.

The clamp part is the same size as a typical handlebar pipe, Φ22mm to Φ22.2mm, so you can attach a variety of items such as handlebar clamp-mounted helmet holders and meters.

The brace’s clamp width can be adjusted freely, making it compatible with many genuine and custom handlebars (see above for dimensions). The clamp features an open/close hinge, allowing for easy installation without removing the handlebar pipe.

The clamping range of the multi-clamp bar part (Φ22.2) of the handle brace is approximately 52 mm wide, with two locations on the left and right.

The body is precisely machined from aluminum, the surface is shot blasted, and then color anodized. Two colors are available: silver and black. The body features the SP Takegawa logo.

● Universal

● Suitable for handlebar pipes: Φ22mm to Φ22.2mm

● Handlebar clamp width: With the handlebar brace straightened, the distance between the clamps can be adjusted continuously within the range of 203mm to 285mm

Silver…7,480 yen (tax included) Product number: 08-01-0211

Black…7,480 yen (tax included) Product number: 08-01-0212

◎Applicable handlebar pipes made by SP Takegawa (The handlebar pipes in the table below can be fitted with the adjustable handlebar brace at the same time)

※本製品は、モバイルホルダーやナビゲーション等の固定を行う、マルチクランプバーとしての用途を目的としております。ハンドルパイプの剛性アップや転倒時のハンドル保護としては、不十分となります。予めご了承ください。
※過度な負荷は与えないでください。車両運送時等の固定器具としては使用できません。

Meter protection film (clear glossy/TPU/1 sheet) … 3,080 yen (tax included) Product number: 05-06-0080

Target vehicle: Cygnus Griffus (BKG1/BKG2/BKG3/BKG4/BKG5/BKG6)

This two-layer protective film protects the meter of Yamaha’s popular scooter, Cygnus Griffus, from scratches, UV rays, and dirt. It consists of a protective film for the main body and a protective film for the adhesive surface.

By attaching this product to the surface of the meter, even if mud or dust accumulates, you can clean and maintain it without damaging the meter panel itself.

The film is a clear glossy type that provides excellent visibility without compromising transparency. It is also made of a soft TPU material to accommodate curved meter panels. It minimizes the gap between the meter panel and the protective film, maintaining a natural appearance even after installation. Includes one sheet.

※本製品は水貼りで取り付けを行って下さい。
※本製品は強い衝撃からメーターの画面を保護する事はできません。　
※本製品は“対象車両専用”の保護フィルムになります。
※メーター本体を取り外し保護フィルムを取り付ける必要があります。必ず車種ごとのメーカーサービスマニュアルと併せて取り付け作業を進めてください。
※粘着後に剥がした場合、フィルムが非常に柔らかく粘着が強い素材で破ける為、貼り直す事はできません。予めご了承ください。
※洗浄の際、高圧洗浄機やブラシを使用すると剥がれる恐れがある為、保護フィルム部分を避けて洗浄を行ってください。