A stem kit that allows you to use the Dax 125 inverted forks on the CT125 Hunter Cub! [OVER Racing]

The price of the kit itself is kept low, allowing for greater freedom of customization!

The Honda CT125 Hunter Cub emphasizes its off-road and outdoor appeal with features such as an up-muffler and underguard. A new stem kit for mounting inverted front forks on the Dax 125 has been released, giving this popular bike an even tougher look.

The genuine front fork of the Dax 125 is highly reliable, as it is a genuine part. However, the drawback is that it tends to become unstable when carrying a large amount of luggage on the large rear carrier.

This stem kit uses the original front forks from the Dax 125 and is set to a new stem offset (trail amount) that improves the handling of the CT125 Hunter Cub. It’s not just a custom kit that looks good, it’s also a fun custom kit to ride.

The base kit includes only the stem and axle. By selling the caliper support and front fender parts that are compatible with high-performance Brembo calipers separately, the price of the kit itself is kept low and the degree of customization freedom is increased. We offer an environment where you can freely customize to various specifications.

Inverted Fork Stem Kit for CT125 (23-)

 SIL (Silver)… 102,300 yen (tax included) Product number: 55-061-02

 BLK (Black) … 104,500 yen (tax included) Product number: 55-061-02B

This is a stem kit for mounting the genuine inverted front forks for the Dax 125 on the CT125 Hunter Cub. Not only does the inverted fork improve rigidity and power, but it also reduces handlebar wobble by optimizing the offset and increasing the trail, resulting in improved riding stability.

The large rear carrier allows for heavy and large-capacity luggage to be loaded, making the bike extremely light and providing a sense of security in handling that tends to be unstable.The visual impact of the massive, racy appearance also greatly enhances the custom feel.

●Kit contents

・Top bridge

・Stem under bracket

・Stem nut

・Headlight stay

・Axle shaft

・Wheel collar ※Use with genuine wheel collar

※Fork body, caliper support, fenders are not included in the kit. Must be purchased separately

Recommended parts

: Honda genuine Dax125 fork: R-side assembly: 51400-K26-G61 L-side assembly: 51500-K26-G01

STD fender stay for inverted fork kit CT125 (23-) … 13,200 yen (tax included) Product number: 57-061-05

This bracket kit allows you to mount the stock fenders for the CT125 Hunter Cub on vehicles equipped with the stem kit above. Even with the inverted front forks installed, it maintains the CT125 Hunter Cub’s distinctive look and maintains a stock-oriented style. Designed to prevent scratches on the inner tube and allow the stock fork guards to be installed at the same time.

●Contents

: Mounting bolts

, brackets

, collars

*For use with 55-061-02/55-061-02B inverted fork stem kits only

*Can be installed together with fork guards (HONDA genuine parts 51650-K0F-D10ZA / 51620-K0F-T00)

Carbon fender kit for inverted fork kit CT125 (23-) … 27,500 yen (tax included) Product number: 73-061-03C

This carbon down fender kit is for vehicles equipped with the stem kit above. When installed together with the front up fender, it further emphasizes the adventure style. It is highly effective as a mudguard and also helps protect the engine when the original fender is removed.

Front half fender body: Twill carbon fiber

Mounting bolts

and brackets included

*For use with 55-061-02/55-061-02B inverted fork stem kits only

Brembo 2-Piece (Crab) Caliper Support for Inverted Fork Kit CT125 (23-)

 SIL (Silver) … 30,800 yen (tax included) Product number: 83-061-12

This caliper support kit allows you to mount Brembo calipers on a vehicle equipped with a stem kit. By mounting high-performance Brembo calipers, you can increase braking power and maximize the performance of your inverted fork.

Compatible with Brembo 2P/84mm calipers

. Includes caliper mounting bolts

. Silver anodized finish

. Compatible with genuine brake hoses (mesh brake hoses recommended).

*Not included with Brembo calipers.

*For use with 55-061-02/55-061-02B inverted fork stem kits only.

Give your Hunter Cub CT125 an adventure look! Easily achieve it with a front-up fender, lowered half fenders, and body protector [OVER Racing]

Motorcycle parts manufacturer OVER Racing (Over Racing Projects) has released new parts for the Honda Hunter Cub CT125. We will introduce the front up fender, down half fender, aluminum pipe guard, and body protector. REPORT ● Kita Hideaki (KITA Hideaki) OVER (Over Racing Projects) https://www.over.co.jp/

https://motor-fan.jp/bikes/article/129651

The popular GP-PERFORMANCE muffler, now available in an up-style version! New parts for the Honda CT125 Hunter Cub are coming soon! [OVER Racing]

Motorcycle parts manufacturer OVER (Over Racing Projects) has released a variety of parts specifically for the popular Honda CT125 Hunter Cub, a 250cc moped. We’d like to introduce you to the GP-Performance muffler with the same up-type design as the original, an aluminum swingarm that boasts excellent rigidity and a high level of customization, aluminum flat pedals and aluminum high-grip step bars that improve the grip of the soles of your shoes, and a center stand that is approximately 50mm wider than the original width. REPORT ● KITA Hideaki OVER (Over Racing Projects) https://www.over.co.jp/

https://motor-fan.jp/bikes/article/120967

Over Racing’s swingarm is a cool and understated part for the CT125 Hunter Cub. It also boosts performance. | Osaka & Tokyo Motorcycle Show 2023

It seems like custom parts for the Honda CT125 Hunter Cub are now available from various manufacturers. It’s about time that many users want to differentiate themselves with unique parts. We’ve found some noteworthy suspension items at the 2023 Tokyo Motorcycle Show! PHOTO & REPORT ● MASUDA Mitsuru

https://motor-fan.jp/bikes/article/71229