Aluminum parts that go perfectly with the Honda Dax 125! New products are coming soon that are convenient and can be used to dress up your bike. [G Craft]

A modified Honda Dax fully equipped with luxurious custom parts

Slim center carrier…17,600 yen (tax included) / Product number: 32857

Compatible models: Dax 125 (JB04, JB06)

This slim carrier is attached to the top of the main frame. It protects the main frame from scratches and allows luggage to be loaded in the center of the vehicle, so it does not interfere with driving. The top plate is made of aluminum and the side plates are made of steel. The maximum load capacity is 1.0 kg.

Down tube kit…44,000 yen (tax included) / Part number: 32815

Compatible models: Dax 125 (JB04, JB06)

Down tube made of oval pipe (32mm x 22mm). Ideal for dressing up your bike and increasing frame rigidity.

※純正エンジン/クランクケース対応
※33070カムカバーブリーザー、31256カムカバーとの同時装着可能
※社外カムカバーとの同時装着は確認がとれておりません
※純正マフラーとの装着確認はとれていますが、社外マフラーとの装着確認はとれておりません
※ヴァイパーショートエキゾーストマフラー (32818)同時装着可能

Billet sprocket guard (various types)…22,000 yen (tax included) / Part number: 32826 (silver), 32826 (black)

Compatible models: Dax 125 (JB04, JB06)

This sprocket cover is machined from 30mm thick aluminum. The shift guide reduces the flex of the gear shaft during shift changes, improving the shift feel and resulting in a more satisfying shift. The genuine crankcase damage prevention plate can also be installed.

SC seat…30,800 yen (tax included) / Product number: 32829

Compatible models: Dax 125 (JB04, JB06)

The “SC” in SC seat stands for S (Slim) and C (Comfort). The part that comes into contact with the inner thighs has been shaped to improve foot placement. To increase freedom of sitting position, the seat features a flat top surface and a tuck-roll shaped surface that provides excellent grip.

The rear end of the seat is embossed with the Gcraft logo and a special tag is sewn on. The seat foam has been lowered 20mm from the stock, improving foot placement while still retaining a moderate amount of firmness.

Multi-side rack right side… 13,200 yen (tax included) / Product number: 32855

Compatible models: Dax 125 (JB04, JB06)

This stylish and convenient multi-side rack can be installed in the space left after removing the original muffler, such as when replacing it with a down muffler. The hole shape uses a MOLLE system, so various items such as Henry Begins system pouches and bags can be attached. The maximum weight of the attached item is 2 kg. Cannot be installed on vehicles with original mufflers or up mufflers.