Customize the Honda Monkey 125 into a retro cafe racer! Includes a rare clutch cover [Tokyo Motorcycle Show 2025]

CITY REACER Monkey 125

Main mounting parts

Rotating handle…under development

A foldable handle reminiscent of the Monkey 50.

Black Hole clutch outer cover…under development

A beautiful and impressive clutch outer cover that uses light to evoke the combustion inside the engine.

Megaphone short muffler…under development

The exhaust pipe has been changed from a normal up-type to a down-type, with a tapered shape that gradually widens in diameter, and a megaphone-type silencer.

Tuck roll seat…under development

This custom seat has been changed from the standard thick type to a semi-slice type, and a vertical tuck roll has been introduced to the seat surface, increasing the level of customization.

Classic turn signal and wing stay set… 16,500 yen (tax included)

This set includes the “Wing Turn Signal Stay” that can be easily replaced with a general-purpose turn signal without any modifications, as it is designed specifically for each vehicle model, plus a selection of classic turn signals. You can choose your preferred turn signal from five types. The “Wing Turn Signal Stay” is made of die-cast aluminum. One set of parts required for installation is included.

●Set contents: Turn signal body, wing stay, dedicated damper, vehicle-specific earth cord, turn signal relay, LED bulb, mounting bolts

Official product website　: https://www.fulness.jp/view/item/000000001347?category_page_id=parts

Marshall Conversion Kit with Billet Light Stays…40,700 yen (tax included)

The popular Marshall 888 series headlight can be installed with a bolt-on. It gives the adorable front view of the Monkey 125 a more stylish and classic look.

High-rigidity aluminum billet headlight stay and meter up stay are also included. Each stay is available in a machined silver finish, or a highly corrosion-resistant anodized black or gold finish.

As options for installing genuine turn signals, there are two types of stem emblems available: one that is mounted in the same position as the genuine ones, and one that is offset below the light like the classic CB400Four (see below for details).

This kit comes standard with an H4 halogen bulb. The VALENTI MOTO Jewel LED Head Bulb ZX can be installed as an additional option at a special set price (+11,000 yen).

●Set contents: 888 lamp (H4 halogen bulb included), headlight case, aluminum billet headlight stay, meter up stay, dedicated conversion harness

[Optional LED Bulb Details]

Manufacturer: Valenti [valenti]

Product Name: Valentimoto LED Head ZX Series H4 6000K

Part Number: MZX10-H4-60

Shape: H4 Hi/Low Compatible Bulb Shape: H4 60W/55W

JAN: 4589888758808

Lumens: Hi 4300lm / Low 3000lm

Power Consumption: 45W

*Note: Vehicles registered after January 1, 2006 are prohibited by law from being driven on public roads with yellow lenses installed (Article 29, Paragraph 1 of the Safety Standards of the Road Transport Vehicle Act).

Official product website　: https://www.fulness.jp/view/item/000000001331

Marshall Conversion Kit Stem Emblem Set …6,300 yen (tax included)

By using it in combination with the Marshall Conversion Kit, you can attach an emblem to the front of the stem, creating a beautiful coordinated look around the front. The horn, which is always conspicuous, can be stored behind the headlight for a clean look. The stem emblem comes in two types: genuine HONDA plated and FULNESS original black painted.

*Note: This is for use with the FULNESS Marshall conversion kit only and cannot be installed when using the original headlight.

●Set contents: Dedicated bracket, HONDA stem emblem, grommet

Official product website　: https://www.fulness.jp/view/item/000000001349

It looks like a Honda Motora, but it’s two sizes larger. The base vehicle is the Cross Cub! | Tokyo Motorcycle Show 2025

PMC, which makes custom parts for Kawasaki Z-series bikes, exhibited a custom model at its booth at the Tokyo Motorcycle Show, based on the famous (or perhaps infamous?) Honda Mototra from the 1980s. This bike, built as a demo car for the company’s custom parts brand “FULNESS,” has been named “Shin Mototra.”

https://motor-fan.jp/bikes/article/140288

The pastel-colored CT125 Hunter Cub and its white ribbon-style wheels look amazing! The white double seat and wheels also add a touch of style. | Motorcycle Show 2024

The popular custom parts brand “FULNESS” will be exhibiting at the Tokyo Motorcycle Show 2024. At the FULNESS booth, a refreshing custom Honda CT125 Hunter Cub with original light blue paint was on display. The company’s new parts were also on display. PHOTO/REPORT●KITA Hideaki FULNESS https://www.fulness.jp/

https://motor-fan.jp/bikes/article/105989