Napoleon, the synonym for aftermarket mirrors, releases stylish mirrors in five types and nine styles

Tanax, known for its Napoleon brand of motorcycle mirrors, has released nine stylish mirrors in five different types.

Arrow Mirror

This lightweight street mirror features a sharp housing design with edgy edges and a turner that can be used on either the left or right side. The turner at the base is designed to safely deflect impacts from the front and rear, and can be continuously adjusted without tools even after installation, so you can quickly adjust any misalignment that bothers you while driving, even on the go. The mirror uses an R1000 mirror that provides a wider view than the original. This allows you to see a wider area and increases the amount of information in the rear view, improving peace of mind and safety.

• Overall height: 160mm, overall width: 210mm, mirror width: 138mm, mirror height: 100mm, weight: 258g
• Material/Housing: PP resin, Turner: Zinc die-cast, Mounting screw: 10mm positive thread, left and right compatible
• Price: 3,520 yen

Trad Mirror EX

A traditional style that combines a metal stay with a small round mirror. It matches any bike, from classic style bikes to scooters. The mirror part has an outer diameter of φ105mm and meets safety standards, so it can be used on vehicles of all model years. The mirror part uses an R1000 mirror, which makes it look wider than the original. The high-quality mirror, which is particular about beauty, has less distortion and is treated to reduce glare on the cut surface, giving it a high-quality view. The mounting part uses an FR joint with an impact-absorbing mechanism, so it is designed to absorb impacts from the front and rear and loosen the bolts for safety. Two colors are available: chrome plated and black.

• Overall height: 203mm (maximum), overall width: 200mm (maximum), mirror diameter: φ105mm, weight: 364g (chrome plated), 356g (black)
• Material: Housing: ABS resin, Stay: Steel, Mounting screw: 10mm positive thread, common to both left and right
• Price: 3,960 yen

Classical Mirror EX

This is a classic mirror with a traditional design that uses an oval shape for easy viewing. The mirror measures 137.5mm wide and 80.5mm high, meeting safety standards, and its horizontal shape makes it easy to check behind you. The mirror has a curvature radius of R=1000, making it appear wider than the original, making it easier to check behind you and increasing safety. It also uses a high-quality mirror with minimal distortion. The mirror can be freely adjusted with a single bolt, allowing it to be set up to suit the shape of the handlebars and the rider’s body type. The mounting part also uses a FR joint with a shock-absorbing mechanism. It is available in two colors: chrome plated and black.

• Overall height: 175mm (maximum), overall width: 232mm (maximum), mirror size: 137.5 x 80.5mm, weight: 373g (chrome plated), 364g (black)
• Material: Housing: ABS resin, Stay: Steel, Mounting screw: 10mm positive thread, common to both left and right
• Price: 3,960 yen

Shark Mirror 8R/L

This stylish, low-position custom mirror features a horizontal wing design that resembles wings spread over the handlebars. The mirror uses a silver mirror with minimal distortion. The cut surface has been treated to prevent glare, and attention has been paid to the visibility and texture. With a curvature radius of R=1000, it is a wide-view mirror that can see a wider area than the original mirror. The mirror housing is 128mm wide and 83mm high, giving it a slightly thicker aerodynamic shape. The stays use winglet stays with a horizontal wing motif. Made from PA resin and GF, it is lightweight and durable. The mounting part uses a ball adjust, which provides a shock-absorbing mechanism in the event of contact and allows for easy angle adjustment. The main bolts are made of stainless steel, making it resistant to rust.

• Overall height: 114mm, overall width: 330mm, mirror size/width: 128mm, height: 83mm, weight: 438g
• Material: Housing: ABS resin, Stay: Steel, Mounting screw: 10mm clockwise thread, available for right and left
• Price: 7,480 yen each

46 Mirror 3, Mirror 4

46Works, headed by custom builder Shiro Nakajima, has earned international acclaim for his BMW-based custom bikes. Nakajima, who not only builds custom bikes but also refurbishes classic car parts and creates original furniture, has designed an original mirror. Two types of beautiful custom mirrors crafted from machined aluminum are now available. The “Mirror 3” features a round mirror with a φ95mm mirror surface. The silver mirror with a curvature radius of R=1000 ensures a wide angle of view despite its compact size, ensuring rear visibility. The machined aluminum mirror housing features a minimally sleek bezel, and the stays are machined to create a edgy look. The surface is finished in a beautiful matte black with matte blast anodized aluminum. The handlebar mounting uses a FR joint with a shock-absorbing mechanism. Adjustment is possible via a ball joint, and by changing the orientation of the stays during installation, it can be used with separate or raised handlebars. The “Mirror 4” has the same design as the Mirror 3, but with an even more compact mirror housing. The effective mirror surface dimension is φ81mm, so according to safety regulations it can only be installed on vehicles manufactured before 2006, but it is a small mirror that fits better on classic models.

[Mirror 3]

• Overall height: 115mm, overall width: 198mm, mirror diameter: φ95mm, weight: 205g
• Material: Housing: Aluminum, Stay: Aluminum + Iron, Mounting Screw: 10mm Right-Handed Thread, Available in Right-Hand and Left-Hand
• Price: 17,600 yen each

[Mirror 4]

• Overall height: 108mm, overall width: 191mm, mirror diameter: φ81mm, weight: 175g
• Material: Housing: Aluminum, Stay: Aluminum + Iron, Mounting Screw: 10mm Right-Handed Thread, Available in Right-Hand and Left-Hand
• Price: 17,600 yen each