Special Parts Takegawa Aluminum Billet 2-POT Caliper (Silver)…27,500 yen (tax included) / Part Number: 06-08-0267
Universal / Mounting pitch: 84mm (same size as Brembo calipers), Piston diameter: Φ34mm
One set includes the caliper body, banjo bolt, sealing washer, and bleeder screw/cap.
The “Aluminum Billet 2-POT Caliper” for disc brakes is precisely machined from aluminum, which is excellent in strength and durability, and has a highly designed surface with colored anodizing. It provides excellent braking power and is suitable for a wide range of driving situations, from street riding to sports driving.
This caliper uses Takegawa’s unique internal structure, and is finished with high precision down to the smallest detail, allowing for a finer brake touch when braking, significantly improving control performance.
The center of the caliper is engraved with a yellow TAKEGAWA logo and is coated with heat-resistant paint. The mounting pitch is 84mm and the piston diameter is Φ34mm.
This product comes with a banjo bolt for the caliper and two aluminum sealing washers. The included banjo bolt and bleeder screw are M10 x P1.25.
The caliper body has two banjo bolt mounting locations, so you can choose from two mounting locations for the banjo bolt and bleeder screw depending on the vehicle specifications.
ADVERTISEMENT
Vehicles that have been confirmed to be installed by the manufacturer
MONKEY 125, GROM, DAX 125 Front installation conditions
The photo shows a Monkey 125. The bike is equipped with Takegawa Special Parts’ aluminum billet 2-pot caliper, caliper bracket, and disc rotor.
[Applicable vehicles]
Monkey 125 (JB02) (JB03) (JB05) including Thai models
GROM (JC92) MSX GROM (MLHJC92)
Dax 125 (JB04) (JB06) *excluding Thai models
In addition to this product, the SP Takegawa Front Caliper Bracket Kit (06-08-0237) must also be installed. As for the disc rotor, either the genuine front disc rotor or the SP Takegawa front floating disc rotor can be installed at the same time.
For ABS vehicles, the original brake hose can be used for installation. For non-ABS vehicles, a separate brake hose, banjo, and banjo bolt are required. Hose length and banjo angle vary depending on the specifications of the handlebar pipe and front brake master cylinder, so please check the online catalog.
Monkey 125 rear mounting conditions
ADVERTISEMENT
The photo shows a Monkey 125. The bike is equipped with Takegawa Special Parts’ aluminum billet 2-pot caliper, caliper bracket, and disc rotor.
[Applicable vehicles]
Monkey 125 (JB02) (JB03) (JB05) including Thai models
In addition to this product, the SP Takegawa rear caliper bracket kit (06-08-0123) must also be installed. As for the disc rotor, either the genuine rear disc rotor or the SP Takegawa rear disc rotor can be installed.
Brake hoses, banjos, and banjo bolts are required separately. Please check the online catalog.
Installation conditions for Monkey 50, Gorilla (carburetor vehicle), Monkey 50 (FI)
The photo shows a 10-inch model.
[Applicable vehicles]
Monkey, Gorilla (carburetor model), Monkey (FI)
applicable model with 10-inch wheels
■For the front:
When installing this product, it is necessary to simultaneously install SP Takegawa’s various Φ30 front fork kits and front caliper bracket kit (06-08-0212).
Separate parts must be purchased to convert to 10-inch wheels and install the Φ30 front fork kit. Please check the online catalog.
■For the rear:
To install this product, you must also install SP Takegawa’s various rear disc brake kits and Φ160 disc rotor & bracket kit (06-08-0030).
Separate parts must be purchased for converting to 10-inch wheels and installing the rear disc brake kit. Separate brake hoses, banjos, and banjo bolts are required. Please check the online catalog for details.
Precautions
This product cannot be used as is on various factory vehicles.
When installing this product, you will also need to install a separately sold caliper bracket specifically for the vehicle.
SP Takegawa is compatible with various caliper brackets for Brembo 2-piston calipers.
In addition, depending on the vehicle specifications, you may need to purchase brake hoses, banjos, and banjo bolts separately.
This product is a general-purpose product.
It is the same product as the Brembo 2-piston caliper (excluding the Brembo machined aluminum type), including the mounting pitch of 84mm.
Please refer to the PDF dimension diagram for the caliper dimensions.
Download the PDF dimension diagram .
Since this is a universal product, there may be areas where the brake pads do not make contact depending on the shape of the disc rotor of the vehicle it is installed on. In such cases, for safety reasons, you will need to check the contact with the disc rotor and scrape off any unnecessary parts of the brake pads.
Click here to download the product guide PDF (data current as of June 2025)
PDF Download
●Official product website SPECIAL PARTS TAKEGAWA / Aluminum billet 2-pot caliper (silver)
A staple of the world’s best MotoGP machines! Brembo, the world-famous Italian brand known for its disc brake calipers, unveils its cutting-edge products for the first time at EICMA 2024Brembo, the world leader in high-performance braking systems, unveiled its latest innovations at the Milan Motorcycle Show (EICMA) 2024. The company unveiled a variety of new products, including the PRO/PRO+ package for supersport bikes, the Distincta® brake and clutch master cylinder, the M4.32 brake caliper, and the new MotoGP brake caliper. REPORT ● KITA Hideaki Brembo https://www.brembo.com/jp/
Galespeed’s “Elaborate Disc Brake Caliper,” a fully 3D machined brake caliper, now comes in a new silver color.Gale Speed is an in-house brand launched by ACTIVE in 2002. The highly requested new color, silver (anodized), has been released for the high-performance disc brake caliper “Elaborate” offered by ACTIVE. “Elaborate” is based on the concept of “a high-quality, elaborate aluminum billet caliper that is primarily used on the street and in sports driving”, and is made by 3D cutting the blank material. As the name “Elaborate” (elaborate, skillful) suggests, it has been finished with a performance that is full of functional beauty. REPORT●Kita Hideaki ACTIVE http://www.acv.co.jp/ Gale Speed https://www.acv.co.jp/galespeed
Nissin’s FSW monoblock caliper has evolved even further! Utilizing friction stir welding, it has succeeded in achieving lighter weight and lower cost [Hitachi Astemo]Hitachi Astemo is a new and advanced technology company for automobiles and motorcycles, which operates the product brands “NISSIN,” “KEIHIN,” and “SHOWA” (which merged in 2020). NISSIN is a trusted brake system brand that is widely used not only for disc brakes for genuine vehicles in Japan and overseas, but also for customizations aimed at improving stopping power. Nissin’s signature “FSW (Friction Stir Welding) Monoblock Caliper” for big bikes has been upgraded. While maintaining the benefits of light weight and high rigidity, it has achieved further weight reduction and cost reduction. Here, we take a look at the manufacturing method of “FSW (Friction Stir Welding),” which is the key to producing this caliper. REPORT●KITA Hideaki
